Design

These are the design decision I made and requested my seller factory to made DURING the purchase.

See mods for the modification I made AFTER getting the cabinet.

See logs for more information on the entire process. Most contents here are extracted from that logs.

Button Types

GoldLeaf (M28*P=2): Flipper/Nudge buttons/Pinball Controls

Purchase link: https://www.ultimarc.com/arcade/buttons/goldleaf-pushbuttons/

Arcade Big LED 60mm (M24*P=2): Launch Ball

Purchase link: https://www.adafruit.com/product/1192

Datasheet: https://cdn-shop.adafruit.com/product-files/1190/Datasheet.jpg

Button Placements

I manually placed the buttons referencing WPC cabinet.

The SketchUp model I used is a WPC (William Pinball Cabinet) Pinball Standard Body Cabinet downloaded from https://github.com/jonaskello/wpc-cabinet

I then modifed the button hole cuttings.

Front View

Left Side View

The measurement is based from http://mjrnet.org/pinscape/BuildGuideV2/BuildGuide.php

The decals is Mario Pinball Land I downloaded from here.


TIP

Check https://onedrive.live.com/?id=D0B13AB5C8ABB0B5!993&resid=D0B13AB5C8ABB0B5!993&ithint=folder&authkey=!AJ09yieMeJ0pWaE&cid=d0b13ab5c8abb0b5 for a list of more artwork that @stuzza commisioned and available to download for non-commercial use.

Cabinet Artwork

I chose Mario Pinball Land from https://www.vpforums.org/index.php?showtopic=26497. Other candidates is Plants vs Zombies.

TIP

In the future I might consider buying Vinyl Art for better quality looking artwork, but first let's see how it looked after I got the cabinet.

Reference

I references the following to get the measurement for standard WPC cabinet.

• http://mjrnet.org/pinscape/BuildGuideV2/BuildGuide.php?sid=cabBody

Tools I used:

• Convert between inches with fractions to mm: https://www.inchcalculator.com/convert/inch-to-millimeter/

Cabinet artwork:

• https://www.vpforums.org/index.php?showtopic=26497